|
| Home: Products Overview: Sort Products by Manufacturer: Marine Air |
MarineAir the World leader in Marine technology offers the marine industry's largest selection of air contiioning system to bring you the comfort of home at sea.
Vector Compact
Vector Rotary
Cabin Mate
Cool Mate
6K-16K Condesing Unit
Mutli Ton Condensing Unit
Chiller Compact
MCW Series
SCW Series
Blow Thru Air Handlers
Defroster
Draw Thru Air Handlers
Fresh Air Makeup Air Handlers
Flex Duct Air Handlers
AT Air Handlers
Slim Line Air Handlers
Environmental Control Unit
Ducting and Transition Boxes
Supply and Return Air Grilles
Seawater Pumps
|
| Vector Compact |
 Unit Design
• Compact design reduces unit size up to 25% of the original Vector Rotary’s size.
• New 18K model now available in 115, 208-230V/60Hz and 220-240V/50Hz.
• The 18K model is built with a high velocity blower. HV blowers are optional on 7-16K models.
• Return air filters are included and are held in place by new filter rails.
• Patented design #5,848,536 provides increased gross cooling capacity and increased
dehumidification.
• Unique compressor and reversing valve mounting reduces vibration.
• Built-in carrying handle provides ease of installation.
• Blowers are fully insulated and rotatable.
• Passport® I/O circuit board operates the EliteTM and Passport I/O displays (model VCD only).
Controls are sold separately.
Electrical Box
• Electrical box is installed on unit, within the footprint dimensions, eliminating additional installation
labor and space required.
• Completely enclosed, water resistant box protects electrical components.
• Internal field wiring connections meet CE Low Voltage directive.
High Efficiency Components
• High efficiency rotary compressors provide reduced amperage, quieter operation, less weight and
increased reliability on 5K - 18K models.
• Condenser coil constructed of spiral, fluted cupronickel encased in a copper shell
provides maximum heat transfer and high corrosion resistance to seawater flow.
• Evaporator coil utilizes enhanced fin design and rifled copper tubing which provide maximum
capacity.
• There are two compact models in the self-contained Vector Compact Series - VCD and VCM.
Each uses a different control. For details, see specifications.
Quality Assurance
• Three year limited warranty when used with the Elite or Passport I/O Controls.
• Each unit is pre-charged, leak checked and test run in all operating modes.
• Charge Guard® protection provides sealed access ports, ensuring environmental
protection and system integrity.
• All units meet or exceed applicable ABYC and U.S. Coast Guard regulations, CE Directives and
general Air Conditioning and Refrigeration Industry (ARI) standards. |
| Vector Rotary |
 High Efficiency Components
• There are two different Rotary models in the self-contained
Vector Rotary Series - VRM and VRP. Both use a different
control.
• High efficiency Tecumseh rotary compressors provide reduced
amperage, quieter operation, lower weight and increased
reliability.
• Condenser coils constructed of spiral, fluted cupronickel
encased in a copper shell provide maximum heat transfer and
high corrosion resistance to sea water flow.
• Evaporator coils utilizing raised lance fin design and rifled
copper tubing provide maximum capacity.
Electrical Box
• Completely enclosed, water resistant box protects electrical
components.
• 5’ harness allows for a remote, accessible location.
• Internal field wiring connections meet CE Low Voltage directive.
Unit Design
• Full base pad decreases noise and vibration.
• Blowers are fully insulated and rotatable.
Quality Assurance
• This product has the most comprehensive warranty in
the industry.
• Each unit is leak-tested, pre-charged and test run in all
operating modes.
• Each unit is pre-charged, test run in all operating modes and
leak checked.
• Charge Guard ® protection provides sealed access ports,
ensuring environmental protection and system integrity.
• All units meet or exceed applicable ABYC and U.S. Coast
Guard regulations, CE Directives and general Air Conditioning
and Refrigeration Industry (ARI) standards. |
| Cabin Mate |
 Design
• Compact design reduces unit size up to 25% of the original size.
Now even more Compact - the 2003 redesign reduces the size of
10-16K units even further, approximately one inch in both width and depth.
• Return air filters are now included, and are held in place by new filter rails.
• Patented design #5,848,536 provides increased gross cooling capacity and
increased dehumidification.
• High efficiency Rotary compressors provide reduced amperage,
quieter operation, lower weight and increased reliability.
• Evaporator coil with rifled tubing and enhanced fin design permit excellent
heat transfer and balanced performance.
• Spiral cupronickel condensing coil provides long-lasting, low mass coil with
increased performance.
• Quiet compressor/fan combination ensures minimum cabin sound levels.
Installation
• Unique “V” shaped drain/base pan provides for easy installation into tight
locations and V-berths.
• Low overall weight allows for ease of handling and positioning of units.
• Blower rotatable for horizontal or vertical discharge.
• Ducting/grille kits and seawater components are available for complete
system installation.
Quality Assurance
• Field proven, reliable digital control allows one touch, simple operation that is
user friendly and programmable (Passport® I/O option). Controls are sold
separately.
• Each unit is pre-charged, test run in all operating modes and leak checked.
• Largest worldwide dealer network for support and service.
• All units meet or exceed applicable ABYC and U.S. Coast Guard regulations,
CE Directives and general Air Conditioning and Refrigeration industry (ARI)
standards. |
| Cool Mate |
 Design
• Patented revolutionary design makes the Cool Mate the smallest
unit in the industry.
• Return air filters are now included, and are held in place by new
filter rails.
• High efficiency rotary compressor provides reduced amperage,
quieter operation, lower weight and increased reliability.
• Evaporator coil with rifled tubing and enhanced fins permits excellent
heat transfer and balanced performance.
• Cupronickel condensing coil provides long-lasting, low mass coil with
increased performance.
• Quiet compressor/fan combination ensures minimum cabin noise
levels.
Installation
• Complete ‘do it yourself’ installation kits are available.
• Low overall weight allows for ease of handling and positioning of units
during installation.
• Due to low amperage draw, the 5K unit can be run on an inverter.
Quality Assurance
• Each unit is pre-charged, test run in all operating modes and leak
checked.
• Largest worldwide dealer organization for assistance with parts or
service.
• All units meet or exceed applicable ABYC and U.S. Coast Guard
regulations, CE Directives and general Air Conditioning and
Refrigeration industry (ARI) standards. |
| 6K - 16K Condensing Unit |
 High Efficiency Components
• Hermetically sealed, high efficiency compressors provide a significant reduction in amp draw.
• Copper encased cupronickel condenser coils are highly resistant to corrosion from continuous
seawater flow.
• Expansion device and check valve assemblies control load balancing during unit operation.
• Pressure switches, thermal overloads and start components afford constant system protection
and proper operation.
Symmetrical Base Design
• Provides optimum space efficiency and installation flexibility. Allows ease in handling and
positioning.
Electrical Box
• Moisture resistant design, corrosion resistant enclosure. Remote mounting capability
CSD units contain the new Passport I/O circuit board.
Integral Base/Drain Pan
• Complete condensation removal with a built-in hose barb. Two sets of vibration isolators ensure
quiet operation. Provides for internal fasting within unit footprint.
Quality Assurance
• Each unit is pre-charged, test run in all operating modes and leak checked at the factory prior
to shipping.
• All surface components are constructed of or coated with materials resistant to fire and
corrosion.
• Charge Guard ® protection provides sealed access ports, ensuring environmental protection
and system integrity.
• All units meet or exceed applicable ABYC and U.S. Coast Guard regulations, CE directives and
general Air Conditioning and Refrigeration Industry (ARI) standards. |
| Multi Ton Condensing Units |
 High Efficiency Components
• Hermetically sealed, high efficiency compressors provide a significant reduction in amp draw.
• Copper encased cupronickel condenser coils are highly resistant to corrosion from continuous
seawater flow.
• Expansion valve and check valve assemblies control load balancing during unit operation.
• Pressure switches, thermal overloads and start components afford constant system protection
and proper operation.
Symmetrical Base Design
• Provides optimum space efficiency and installation flexibility. Allows ease in handling and
positioning.
Electrical Box
• Moisture resistant design, corrosion resistant enclosure. Remote mounting capability.
CSD units contain the new Passport I/O circuit board.
Integral Base/Drain Pan
• Complete condensation removal with a built-in hose barb. Two sets of vibration isolators ensure
quiet operation. Provides for internal fasting within unit footprint.
Quality Assurance
• Each unit is pre-charged, test run in all operating modes and leak checked at the factory prior
to shipping.
• Charge Guard ® protection provides sealed access ports, ensuring environmental protection
and system integrity.
• All units meet or exceed applicable ABYC and U.S. Coast Guard regulations, CE directives and
general Air Conditioning and Refrigeration Industry (ARI) standards. |
| Chiller Compact |
 Innovative Modular Design
• Compact base design allows flexibility in space, usage and layouts.
• Individual modules can be multiplexed to provide precise capacity
requirements for any application.
High Efficiency Components
• Thermodynamically matched components assure maximum performance.
• Tecumseh Rotary and Copeland Scroll compressors provide high efficiency
performance with less power consumption and quieter operation.
The cylindrical shaped compressor allows for a compact design.
• Fewer moving parts ensure higher reliability.
• Condenser coil is custom fabricated of spiral fluted cupronickel to provide
maximum heat transfer and high corrosion resistance.
• Exclusive Digital Diagnostic Controller (DDC) monitors and protects the
system through the use of aquastats, high and low pressure switches, timers,
freeze controls and high limit switches, all programmed to read out on an LED
panel for immediate diagnosis.
Quality Assurance
• Each unit is evacuated to 500 microns, pre-charged, hermetically sealed, load
tested and electronically calibrated at the factory.
• Charge Guard ® protection provides sealed access ports, ensuring
environmental protection and chiller module integrity.
• All units meet or exceed applicable ABYC and U.S. Coast Guard
regulations, CE Directives and general Air Conditioning and Refrigeration
Industry (ARI) standards. |
| Chilled Water MCW Series |
 Innovative Modular Design
• Compact base design and footprint allows flexibility in
space usage and layouts.
• Lightweight aluminum construction provides corrosion
resistant durability and enhances ease of installation.
• Individual modules can be multiplexed to provide precise
capacity requirements for any application.
• Factory assembled vertical and horizontal multiplexed
configurations are available with frames, manifolds and
controls.
• Remote-mountable electrical box allows easy access
for adjustments or service.
High Efficiency Components
• Matched components provide full rated capacity and
assure maximum performance.
• Bi-flow expansion valves balance systems between
heat and cool modes.
• Compact stainless steel brazed plate heat exchangers are
designed for maximum efficiency using minimum space.
• Condenser coil is constructed of spiral fluted cupronickel
to provide maximum heat transfer and high corrosion
resistance.
• Exclusive Digital Diagnostic Controller (DDC) monitors
and protects the system through the use of aquastats,
pressure switches, timers, freeze controls and high limit
switches. All programmed to read out on an LED panel
for immediate diagnosis.
• Standard models operate at 60Hz and 50Hz. Models
are available to operate at voltage, frequency, and
phase combinations to suit customer needs.
• Frames are welded with marine grade aluminum alloy,
primed, then finished with a corrosion resistant epoxy.
Quality Assurance
• Each unit is pre-charged, load tested and calibrated at
the factory.
• Charge Guard- protection provides sealed access ports,
ensuring environmental protection and system integrity.
• All units meet or exceed applicable ABYC and U.S.
Coast Guard regulations, CE Directives and general Air
Conditioning and Refrigeration Industry (ARI) standards. |
| Chilled Water Staged Chilled Water SCW Series |
 High Quality Components
• Seawater side of condenser coils are made of
cupronickel, and refrigerant shells are copper
(NOT steel) for maximum efficiency and corrosion
resistance.
• Compact copper brazed, stainless steel plate
exchangers are designed for maximum efficiency
in a confined space.
• Computer matched components provide maximum
cooling/heating capacity.
• All chillers use thermal expansion valves (TXV).
Unlike the capillary tubes, TXVs automatically
adjust to changing load requirements to maintain
optimum performance.
• Each stage is individually protected by a circuit
breaker, flow switch, freeze protection, water temperature
high limit, high pressure refrigerant
switch, and low pressure refrigerant switch. These
safeties are in addition to the compressor thermal
overload.
Innovative Design
• Compact base design provides flexibility in engine
room layouts.
• Multiplexed modules offer precise BTU requirements
for any application.
• Lightweight, aluminum construction enhances
ease of installation while providing corrosion resistant
durability.
• Complete control circuit provides multiple fail
safes for system protection.
• Vertically mounted units are available.
Individual Refrigerant Circuits
• Redundant design assures cooling if one circuit
malfunctions.
Serviceability
• All compressors accessed from front of condensing
unit ensuring easy change out.
Quality Assurance
• Each unit is pre-charged, load tested and
calibrated at the factory
• Charge Guard ® protection provides sealed access
ports, ensuring environmental protection and system
integrity.
• All units meet or exceed applicable ABYC and
U.S. Coast Guard regulations. |
| Blow Thru Air Handlers |
 Modular Symmetrical Design
• Large plenum chamber for maximum capacity.
• Optimum efficiencies in heat and cool with 3-way
valve that assures proper water flow.
• Electric heating option.
Blower Assembly
• Quickly converts between a vertical or a horizontal
application.
• Extremely quiet diffused air delivery.
Condensate Drain Pan
• Dual drain connections enhance removal of
collected condensation.
• Drain pan is a full 2” high and is completely
insulated.
Quality Assurance
• System matched components assure full BTU
rating.
• All units meet or exceed applicable ABYC and U.S.
Coast Guard regulations, CE Directives and general
Air Conditioning and Refrigeration Industry (ARI)
standards. |
| Defroster |
 Flexible Installation
• Custom configuration for up to six duct ring outlets.
• May be mounted horizontally, vertically, flat or on edge.
• Two modes of operation: defrost or fan only.
Compact Design
• Constructed of lightweight marine grade aluminum.
• Tapered duct housing permits easy mounting and installation
of ducting.
• Slimline style fits easily in overhead applications or under pilot
house coamings.
Durable Construction
• Two part epoxy polyurethane paint resists chipping and
corrosion.
• Replaceable filter assembly in back of machine.
• Quiet, efficient squirrel cage fan for long service life.
Quality Assurance
• All components are coated with a corrosion resistant material
for long life.
• All units meet or exceed applicable ABYC and U.S. Coast
Guard regulations, CE Directives and general Air Conditioning
and Refrigeration Industry (ARI) standards. |
| Draw Thru Air Handlers |
 Unique Compact Design
• Large plenum chamber for maximum capacity.
• Optimum efficiencies in heat and cool with 3-way valve that
assures proper water flow.
• Electric heating option.
Blower Assembly Module
• High velocity fan assembly.
• Ductable, rotatable blowers offer installation flexibility.
• Permanent split capacitor motors reduce amperage draw.
• Completely insulated with closed cell insulation.
Condensate Drain Pan
• Dual threaded drain connections provided for watertight hose fittings.
• Drain pan is enclosed and fully insulated.
• Optional positive flow drain pans provide a shallow sump for
enhanced condensation removal.
Quality Assurance
• System matched components assure full BTU rating.
• All units meet or exceed applicable ABYC and U.S.
Coast Guard regulations, CE Directives and general
Air Conditioning and Refrigeration Industry (ARI) standards. |
| Fresh Air Makeup Air Handlers |
 Features
• Compact design, with large coil shroud volume for optimum
performance
• High-efficiency PSC internal-motor blower is standard
• Coils are 3 or 4 rows for improved cooling and dehumidification
• Sloped, Positive-Flow drain pan with anti-slosh, antifungal foam
• Integrated chassis with vibration isolation mounting feet
• Exposed sheet metal is insulated to prevent secondary
condensation
• Remote air bleeder on 6ft (1.8m) of flexible tubing with ball valve
• Large, remote electrical junction box with 6ft (1.9m) wire harness
• Corrosion resistant coated evaporator coil, blower, and sheet
metal
• Water pressure test ports for troubleshooting
• Allowance for connecting variable fan speed drive
• Rotatable blowers
• Washable air filter included
• ISTA Level IIIA certified packaging |
| Flex Duct Air Handlers |
 Unique Compact Modular Design
• Mounting footprint provides greater installation flexibility.
• Easy disassembly for access to components.
• Large plenum chamber for maximum capacity.
• Optimum efficiencies in heat and cool modes, with 3-way
valve that assures proper water flow.
• Electric heating option.
Blower/Coil Assemblies
• Efficient, centrifugal blowers with shaded pole motors.
• Thermoplastic mounting rings enable easy installation of
ducting or transition boxes.
• Coils with enhanced fins and cross-hatched “Outokumpu”™
brand tubing for maximum efficiency.
• Ductable, rotatable blowers offer installation flexibility.
• Insulated with closed cell insulation.
Condensate Drain Pan
• Unique angled drain pan enhances removal of condensation.
• Dual threaded drain connections provide for watertight hose
fittings.
• Drain pan is fully insulated to prevent sweating.
Quality Assurance
• Each unit is test run in all operating modes and leak checked.
• All units meet or exceed applicable ABYC and U.S.
Coast Guard regulations, CE Directives and general Air
Conditioning and Refrigeration Industry (ARI) standards. |
| AT Air Handlers |
 Features
• Compact design, with large coil shroud volume for optimum performance
• High-efficiency PSC internal-motor blower is standard (“HV” models)
• Coils are 3 or 4 rows for improved cooling and dehumidification
• Sloped, Positive-Flow drain pan with anti-slosh, antifungal foam
• Integrated chassis with vibration isolation mounting feet
• Exposed sheet metal is insulated to prevent secondary condensation
• Remote air bleeder on 6ft (1.8m) of flexible tubing with ball valve
• User friendly, remote electrical junction box with 6ft (1.9m) wire harness
• 24K unit with high-efficiency internal-motor blower
• Water pressure test ports for troubleshooting
• Allowance for connecting variable fan speed drives
• Rotatable blowers
• Washable air filter included. Micro-Particle Anti-Allergenic air filters available.
• ISTA certified packaging |
| Chilled Water Slim Line Air Handlers |
 Modular Design
• White aluminum construction.
• Unique design allows either vertical or horizontal air
discharge.
• Flexible design allows for alternate supply and return
air locations.
• Pre-plumbed for either right or left connection.
Blower Assembly
• Permanent split capacitor motors for quiet, efficient
operation.
• Fire retardant plastic blower housings.
• Framed filters are made of washable, fire retardant
materials. Filters are attached to unit by stainless
steel, “snapping” mount clips.
• Optional auxiliary heating elements available.
Fan Coil Assembly
• Enclosed insulated drain pan with threaded, dual
drain connections for improved condensate removal.
• Fully insulated cabinetry.
• Internal 3-way valve assembly, with air bleeder.
Quality Assurance
• System matched components assure full BTU
rating.
• All units meet or exceed applicable ABYC and U.S.
Coast Guard regulations, CE Directives and
general Air Conditioning and Refrigeration Industry
(ARI) standards. |
| Environmental Control Unit |
 Design
Radome ECU Unit Design
• Totally self-contained. No other components are
needed.
• Small size and lightweight construction allows for
easy installation.
• Corrosion resistant coating provides durability in
salt air operations.
• Solid state digital controller provides precise
operation.
• Control circuitry monitors and protects unit during
operation.
High Efficiency Components
• High efficiency Tecumseh rotary compressors
provide reduced amperage, quieter operation,
lower weight and increased reliability.
• Evaporator and condenser coils utlize enhanced
fin design and rifled tubing designs providing
maximum capacity.
Quality Assurance
• Each unit is pre-charged, test run in all operating
modes and leak checked.
• Charge Guard ® protection provides sealed
access ports, ensuring environmental protection
and system integrity.
• All units meet or exceed applicable ABYC and
U.S. Coast Guard regulations, CE Directives and
general Air Conditioning and Refrigeration
Industry (ARI) standards. |
| Ducting and Transition Boxes |
 Ducting Design
Two Types of Ducting Available
• Round/wire with woven fabric.
• Round/wire and mylar fabric shell with 1.0” (2.6cm) wall
thickness insulation.
Full Range of Diameters and Lengths
• 3” through 8” (7.6cm through 20.3cm) diameters.
• 5’, 10’, 20’, and 25’ (1.53m, 3.04m, 6.10m, 7.62m) lengths.
Installation
• All ducting attaches easily to associated rings.
Transition Box Design
Large Selection and Variety Available in Aluminum
and ABS Plastic
• Transitions.
• Enclosed air boxes.
• T-boxes for units.
Air Flow Designed and Tested Components
• Matched to Marine Air Systems’ grilles and blowers.
• Non-restrictive air flow.
• All rings designed for close tolerance fit with ducting.
Installation
• Perimeter flanges on all boxes for mounting ease.
Aluminum Style Transitions and Boxes
• Fully insulated.
• Standard and custom sizes.
• Fits in any application where space is critical.
ABS Plastic Style Transitions and Boxes
• Off the shelf availability.
• Flexible applications.
• Vacuum formed ensuring consistent high quality.
ABS Plastic T-Boxes
• Off the shelf availability.
• Insulated mounting pads provided.
• Unique stepped ring design for flexibility. |
| Supply and Return Air Grilles |
 Design
Large Selection and Variety of Grilles
• Standard and custom materials complement all yacht interiors.
• Custom sizes available for any application.
Wood Frame Grilles
• Pop out louver panels with Return Air Grilles have easy to clean
replaceable filters.
• Supply Air Grilles have double deflection, moveable louvers
available in anodized bronze or aluminum finish.
Aluminum Grilles
• Supply air grilles have adjustable louvers to direct air flow.
• Return air grilles feature durable fixed-vane louvers.
• Return air grilles are supplied either with or without filters
depending on system requirements.
• Painted grilles are sprayed with polyurethane.
• Multiple color selection.
Product Characteristics
Wood Frame Grilles
• Cut-out dimensions are the nominal grille size, i.e., a 10 x 5 VH
requires a 10” x 5” (25.4cm x 12.7cm) cut out.
• Outside frame dimensions are 0.9375 +/- 0.0625 (2.4cm +/- 0.16cm)
lager than nominal grille size, i.e., a 10 x 5 VH has overall dimensions or
10.9375” x 5.9375” (27.8cm x 15.1cm).
• Depth of grilles: VH is 1.375” (3.5cm), VML is 1.875” (4.8cm),
RA is 0.875” (2.2cm), measured from back of frame.
• Frame (flange) dimensions are 0.563” (1.4cm) on all sides.
Aluminum Grilles
• Cut-out dimensions for the TH, TV, and TRA style grilles are 0.375”
(1.0cm) smaller than the nominal grille size, i.e., a 10 x 5 TH requires a
9.625” x 4.625” (24.4cm x 11.7cm) cut-out. The TRAF style grilles are
0.125” (0.3cm)
smaller.
• Outside frame dimensions are 0.875” (2.2cm) larger than the nominal
grille size, i.e., a 10 x 5 TH has overall dimensions of 10.875” x 5.875”
( 27.6cm x 14.9cm).
• Depth of grilles: TH and TRA are 0.875” (2.2cm), TRAF is 1” (2.5cm),
measured from back of frame.
• Frame (flange) dimension is 0.625” (1.6cm) on all sides.
Plastic Grilles (Circular)
• Depth of grilles: 2SA is 1.31” (3.3cm), 3SA is 2.16” (5.5cm), 4SA is
2.38” (6.0cm), measured from back of frame.
• Frame (flange) dimensions: 2SA is 2.75” (7.0cm), 3SA is 3.875” (9.8cm),
4SA is 5.50” (14.0cm), in diameter.
• Cut-out dimensions are 2.0” (5.1cm), 3.0” (7.6cm), and 4.0” (10.2cm)
respectively, in diameter.
• A special adapter is available to use the 4SA with 3.0” (7.6cm) ducting. |
| Seawater Pump |
 Features
• Pumps are centrifugal type, providing longevity, quiet operation and minimum maintenance.
• Three phase AC motors are ignition protected. Single phase AC motors have built-in
thermal overload protection. Single phase pumps P-700 and smaller are ignition protected.
• Pump wetted components are constructed of high quality, non-corrosive materials.
• Most pump heads are easily rotated, allowing proper application, maintenance and service.
• All threaded intake and discharge ports are U.S. standard taper pipe thread (NPT).
• Each pump is supplied with a vibration isolated mounting bracket, intake and discharge hose
fittings and electrical connections.
• All units meet or exceed applicable ABYC and U.S. Coast Guard regulations, CE Directives and
general Air Conditioning and Refrigeration Industry (ARI) standards. |
For RFQ (Request For Quotation), kindly drop us an email, and we will respond to your email within 1 working day.
Enquiries: mgt@tripower.com.sg |
|
|
|
|
