|
Home: Products Overview: Sort Products by Manufacturer: Grunert |
Grunert offers a wide range of solutions for AC, DC and engine-driven applications, in a variety of capabilities to suit individual requirements. You can choose from a wide selection of dry plate evaporators and holdover plates. All Grunert systems run on environmentally friendly R-134A refrigerant gas.
Holdover Plates
Polar Mate
Mariner
Passagemaker
Caribbean
|
Holdover Plates |
True Eutectic Solution
• Specially formulated mixture of water, salts and
inhibitors.
• Provides stable box temperatures throughout
holdover period.
• Injected into plates under a vacuum (30 microns).
• Four temperature ranges available: 0°F (-18°C),
-9°F (-23°C), and -18°F (-28°C) for freezer applications
and 26°F (-3°C) for refrigerator applications.
Unique Stainless Steel Construction
• Hand polished #304 stainless steel (.062) for clean,
aesthetic appearance.
• Easy mount flange system on short side of all
plates.
• Internally gussetted steel tubing improves thermal
transfer and is high pressure tested to 550 psi.
• Hand welded seams by certified TIG welders.
• Wide variety of sizes and ranges to accommodate
various box designs.
Dual Circuit Design
• Permits paralleled operation for engine drive and AC
or DC voltage condensing units for redundancy.
• Retrofit crossover assembly for easy conversion to
single unit.
• Rapid “pull down” of plate temperature when run
with a double pass on one condensing unit.
• Dual set of thermostat sensing wells for accurate
temperature control. |
Polar Mate - Artic and Antartic Models AC and DC Voltage |
Polar Mate
• Each unit is equipped with LeakView, an ultraviolet dye
system which enables small leaks to be located visually
with a UV light.
• New, larger capacity Danfoss® compressor. (DC Only)
• Built-in fuse for component protection. (DC Only)
• Smaller, easier to use quick connects.
• Receiver for installation and run reliability.
Complete Kit
• Unit can be shelf mounted or bulkhead mounted with additional
bulkhead mount kit.
• Two sizes of evaporators can be configured for custom
applications.
• Horizontal evaporators are supplied with a door assembly
and horizontal ice cube trays.
• Vertical evaporators are supplied with extruded
aluminum vertical ice cube trays.
• 15’ refrigeration line set with “quick connect” fittings provided
with each system.
High Quality Components
• Hermetically sealed compressor for quiet, efficient
operation.
• Water cooled condensers are constructed of spiral fluted
cupronickel encased in a copper shell providing
maximum heat transfer and high corrosion resistance to
seawater flow.
Environmental Considerations
• All units have quick connect fittings and are pre-charged
with refrigerant for ease of installation.
• Utilizes “ozone friendly” refrigerant R-134A.
Quality Assurance
• Each unit is assembled with a charge of nitrogen to
ensure that scale does not form during soldering.
• Every unit is leak checked, test run and shipped
pre-charged with refrigerant.
• Charge Guard® protection provides sealed access ports
to ensure system integrity during handling and
installation. |
Mariner - DC Voltage / Belt Driven Model |
Modular Concept
• Unique compact base fits any application.
• Water-cooled and Air/Water-cooled models
available.
High Quality Components
• Replaceable brushes on all DC motors.
• Continuous duty cycle rating on DC motors.
Remote Electrical Box
• Completely enclosed box protects components
• On board, low-voltage (DC) circuit provides safe
control operation.
Environmental Considerations
• Utilizes “ozone friendly” refrigerant R-409A.
• All units have base valves with service ports
for evacuation, leak checking and refrigerant containment.
Quality Assurance
• Each unit is hermetically sealed using nitrogen,
ensuring a contaminate-free circuit.
• Units are leaked-checked, test run and shipped
pre-charged with refrigerant.
• Charge Guard® protection provides sealed
access ports to ensure system integrity during handling and installation. |
Passagemaker - AC Voltage / Hermetic Models |
High Quality Components
• Hermetically sealed compressor for quiet, efficient
operation.
• Vibration isolators are incorporated in all mounting
platforms for additional noise reduction.
• Replaceable filter/drier without refrigerant charge loss.
• Sight glass/moisture indicator assembly to monitor system
refrigerant charge.
Remote Electrical Box
• Completely enclosed box protects all components.
• 5’ harness allows for a dry, accessible mounting location.
• Low voltage (12volt) controls provide an extra margin of
safety.
Environmental Considerations
• Additional service valve permits refrigerant isolation for
drier change.
• Utilizes “ozone friendly” refrigerant R-404A.
Quality Assurance
• Each unit is assembled with a charge of nitrogen to ensure
that scale does not form during soldering.
• Every unit is leak checked, test run and shipped precharged
with refrigerant.
• Charge Guard® protection provides sealed access ports
to ensure system integrity during handling and installation.
• All units meet or exceed applicable ABYC and U.S. Coast
Guard regulations, CE Directives and general Air
Conditioning and Refrigeration Industry (ARI) standards. |
Caribbean - Engine Drive / Belt Driven Models |
Modular Concept
• Components can be remote mounted.
• Receiver, accumulator, drier, pressure switch and valves
are on one convenient pallet.
High Quality Components
• Rebuildable compressor, including valve plates and shaft
seals, for long life. (ED 150 only)
Remote Junction Box (optional)
• Enclosed box protects components and provides for
convenient connections.
• Low voltage (12 volt or 24 volt) controls provide an extra
margin of safety.
Environmental Considerations
• All systems have base valves with service ports for
evacuation and leak checking the system, and a receiver
for refrigerant storage.
• Utilizes refrigerant 409A.
Quality Assurance
• Each unit is assembled with a charge of nitrogen to ensure
that scale does not form during soldering.
• Every unit is leak checked, test run and shipped precharged
with refrigerant.
• Charge Guard® protection provides sealed access ports
to ensure system integrity during handling and installation. |
For RFQ (Request For Quotation), kindly drop us an email, and we will respond to your email within 1 working day.
Enquiries: mgt@tripower.com.sg |
|
|
|
|
© 2007 Tritex Group All Rights Reserved No. 3 Tuas Avenue 18A. Singapore 638852 Tel: 65-68611188 Fax: 65-68614263
|