|
Home: Products Overview: Sort Products by Manufacturer: Coleman |
Coleman's RV/Marine Air Cooled Rooftop Aircon, offers a powerful cooling capacity and specially designed to protect against the added vibration and salt water corrosion found in marine and industrial applications.
Polar Mach RV
Polar Cub RV
Mach 3 P.S. RV
Mach 3 Plus RV
Mach 3 Plus International
Mach 15 RV
RoughNeck RV
RoughNeck International
SeaMach Marine
|
Polar Mach
|
• High performance - a quiet horizontal rotary compressor is the heart of the A/C refrigeration system.
• Motor and air discharge fan have been matched to
provide maximum air delivery (CFM).
• Refrigeration circuit tubing has been rifled and crosshatched
internally to create turbulence in the refrigerant,
improving the system’s ability to dissipate heat.
• Optional solar energy panel for 12 VDC battery
maintenance.
• Optional heater assembly can be added to provide
5,600 BTUs of warm, chill-chasing heat.
• The condensate water collection pan is constructed of
high-density polyethylene to eliminate any possible
corrosion.
• Durable molded polycarbonate fan guard has been
impact-tested to 40° F. below zero for reliability.
• Electrical compressor-starting components are standard
equipment.
• At 1/3 hp, the motor is the most powerful in the RV
industry and features a fan canopy to protect against
damage from the elements. |
Polar Cub
|
• High performance - a quiet horizontal rotary compressor
is the heart of the A/C refrigeration system.
• Motor and air discharge fan have been matched to
provide maximum air delivery (CFM).
• Refrigeration circuit tubing has been rifled and crosshatched
internally to create turbulence in the refrigerant,
improving the system’s ability to dissipate heat.
• Optional solar energy panel for 12 VDC battery
maintenance.
• Optional heater assembly can be added to provide
5,600 BTUs of warm, chill-chasing heat.
• The condensate water collection pan is constructed of
high-density polyethylene to eliminate any possible
corrosion.
• Durable molded polycarbonate fan guard has been
impact-tested to 40° F. below zero for reliability.
• Electrical compressor-starting components are standard
equipment.
• At 1/3 hp, the motor is the most powerful in the RV
industry and features a fan canopy to protect against
damage from the elements. |
Mach 3 P.S.
|
• New high-efficiency
compressor lowers
amp draw while
still offering a high
capacity for cold air production.
• A specially designed
blower wheel moves
more air yet requires
less power to do it.
• Oversized coils have
raised lance fins to
create an enlarged
surface area. The larger
the surface area, the
more capacity the
coils have to transfer
heat out of the air in
your RV.
• 100% copper tubing
is very durable and
has a rifled interior
wall. The rifling
creates turbulence in
the flow of coolant
that expedites the
removal of heat from
the air.
• High-efficiency fan
motor is mounted
directly to the
bulkhead to fix the
angle of the blower
wheel and keep it
turning freely.
• The blower wheel is
surrounded by a noisereducing
foam scroll.
The scroll also provides
effective insulation. |
Mach 3 Plus
|
• Motor is mounted directly to the bulkhead to
prevent distortion of the angle of the blower wheel
and to ensure a free turning action. This fixes the
motor’s position in relation to the blower.
• At 1⁄3 hp, the fan motor in the Mach 3 PLUS™
is the largest in the industry. It features a
sealed shaft to protect against damage from
the elements.
• Large evaporator and condenser
coils with raised lance fins
enhance the system’s ability to
dissipate heat.
• Start kit with start capacitors and PTCR device is
standard equipment and makes starting easier under
high temperature and humidity conditions.
• Optional Heater Assembly can be added to provide a source of warm air.
• Plastic drain pan eliminates corrosion.
• Corrosion-resistant, stainless steel trusshead screws secure the shroud. The nylon washer underneath flexes with
the shroud in the wind and distributes stress more evenly to prevent shroud fractures. |
Mach 3 Plus (International)
|
• Motor is mounted directly to the bulkhead to
prevent distortion of the angle of the blower wheel
and to ensure a free turning action. This fixes the
motor’s position in relation to the blower.
• At 1⁄3 hp, the fan motor in the Mach 3 PLUS™
is the largest in the industry. It features a
sealed shaft to protect against damage from
the elements.
• Large evaporator and condenser
coils with raised lance fins
enhance the system’s ability to
dissipate heat.
• Start kit with start capacitors and relays is standard
equipment and makes starting easier under high
temperature and humidity conditions.
• Optional Heater Assembly can be added to provide a source of warm air.
• Plastic drain pan eliminates corrosion.
• Corrosion-resistant, stainless steel trusshead screws secure the shroud. The nylon washer underneath
flexes with the shroud in the wind and distributes stress more evenly to prevent shroud fractures. |
Mach 15
|
• The fan motor is mounted directly to the bulkhead to
fix the relative position of the motor, blower wheel and
scroll. This prevents any distortion of the angle of the
wheel and ensures a free turning action.
• At 1⁄3 hp, the fan motor in the
Mach 15™ is the largest in the
industry. It features a sealed shaft
to protect against damage from
the elements.
• Blower wheel has a large diameter
and broad width, contributing to the
highest CFM airflow among rooftop
RV air conditioners.
• Start kit is standard equipment on
the Mach 15™ with start capacitors
and PTCR device that make starting
easier under high temperatures
and humidity conditions.
• All-copper tubing has gas-flux brazed joints
which are more corrosion-resistant than welds.
The copper tubing is rifled inside to create
turbulence in the coolant, enhancing the
system’s ability to dissipate heat. |
RoughNeck
|
• At 1/3 hp, the fan motor in the Roughneck™ is the
largest in the industry. It features a sealed shaft
to protect against dust and cooling capacity loss.
• Large evaporator and condenser
coils have raised lance fins that
enhance heat transfer. The copper
tubing has been rifled inside to
create turbulence in the coolant,
which also enhances the system’s
ability to dissipate heat.
• The top and bottom of the
compressor are secured to the air
conditioner chassis, reducing the
potential for damage when used
in high-stress applications.
• Start kit with start capacitors and relays is provided as
standard equipment to allow the unit to start easier
under high temperature and humidity conditions.
• To prevent distortion of the angle of the blower wheel and
ensure a free turning action, the motor is mounted directly to
the bulkhead. This fixes the motor’s position in relation to the
blower wheel and scroll.
• Optional Heater Assembly can be added to provide a source of warm air.
• Plastic drain pan eliminates corrosion.
• Corrosion-resistant, stainless steel trusshead screws secure the shroud. The nylon washer underneath flexes
with the shroud in the wind and distributes stress more evenly to prevent shroud fractures. |
RoughNeck (International)
|
• To prevent distortion of the angle of the blower
wheel and ensure a free turning action, the
motor is mounted directly to the bulkhead.
This fixes the motor’s position in relation to
the blower wheel and scroll.
• At 1⁄3 hp, the fan motor in the Roughneck™
is the largest in the industry. It features a
sealed shaft to protect against dust and
cooling capacity loss.
• Large evaporator and condenser
coils have raised lance fins that
enhance heat transfer. The copper
tubing has been rifled inside to
create turbulence in the coolant,
which also enhances the system’s
ability to dissipate heat.
• The top and bottom of the
compressor are secured to the
air conditioner chassis, reducing
the potential for damage when
used in high-stress applications.
• Start kit with start capacitors and relays
is provided as standard equipment to
allow the unit to start easier under high
temperature and humidity conditions.
• Optional Heater Assembly can be added to provide a source of warm air.
• Plastic drain pan eliminates corrosion.
• Corrosion-resistant, stainless steel trusshead screws secure the shroud. The nylon washer underneath flexes
with the shroud in the wind and distributes stress more evenly to prevent shroud fractures. |
SeaMach (Marine)
|
• Motor is mounted directly to the bulkhead to
prevent distortion of the angle of the blower wheel
and to ensure a free turning action. This fixes the
motor’s position in relation to the blower.
• Large evaporator and condenser
coils with raised lance fins
enhance the system’s ability to
dissipate heat.
• Start kit with start capacitors and relays is standard
equipment and makes starting easier under high
temperature and humidity conditions.
• All exposed sheet metal parts utilize a baked enamel finish
for corrosion protection.
• Flexible refrigeration hoses provide the utmost in shock
protection.
• Operates from a generator or 110-volt shore power.
• The fan motor is totally enclosed in an epoxy-coated housing
and features a stainless steel shaft for optimum corrosion
protection.
• MagnaGard screws are chemically treated to resist corrosion.
• Plastic drain pan eliminates further corrosion.
• Raised lance fins on the coils increase the turbulence for heat
transfer, enhancing the efficiency of the cooling process.
• The top and bottom of the compressor are secured to the
air conditioner chassis, reducing the potential for damage to
the system when used in high stress applications.
• Start kit with start capacitors and relays is provided as
standard equipment to make starting easier under high
temperature and humidity conditions. |
For RFQ (Request For Quotation), kindly drop us an email, and we will respond to your email within 1 working day.
Enquiries: mgt@tripower.com.sg |
|
|
|
|
© 2007 Tritex Group All Rights Reserved No. 3 Tuas Avenue 18A. Singapore 638852 Tel: 65-68611188 Fax: 65-68614263
|