|
| Home: Products Overview: Sort Products by Manufacturer: Cruisair |
Installed by many top yacht builders as standard equipment, Cruisair offers the industry's largest selection of air-conditioning systems which are suitable for all types and sizes.
Dometic Carry-On
Zephyr Air-Conditioning Kit
StowAway
Commercial DX Framed Package Units
Remote Condensing Unit
Cooling/Heating Units
DX Cooling/Heating Units
Overhead Cooling/Heating
Rotary Switch Assemblies
Cabin Controls
Accessories
Modulating Condensing Unit
Dehumidification System
Modulating Tempering Units
Variable Frequency Drvie
Tempered Water Logic Control
AT Air Handlers
CBLB Air Handlers
Tempered Water Pumps
Tw Auxilliary Heat Modules
Tempered Water ByPass Valve Assemblies
Tempered Water Accessories |
| Dometic Carry-On |
 The Carry-On is the only hatchtop air conditioning
unit that is designed specifically for the marine environment.
It’s ideal for boats that are too small for installed
seawater-cooled air conditioning systems. It installs in
minutes. It won’t break your bank account. And it
pumps out 6720 BTUs of cool, dry relief.
The Carry-On fits in any standard-size hatch. The adjustable,
waterproof hatch bag fits over the unit and the hatch
cover, sealing in the cool air and keeping out insects and
rain. There’s an adjustable leg and a convenient bubble sight
glass on the outside of the unit, making it easy to level the
unit. And when you leave the dock, the Carry-On stows below
deck, in your dockside locker or in the trunk of your car.
All of the operator controls are easily accessible on
the bottom of the unit. You can turn it off and on, set the
thermostat and adjust the fan speed from the cabin. A
detachable air deflector is
standard with the unit.
The Carry-On runs on
normal dockside 115V 60 Hz
power. (The Carry-On 7020,
a 220-240V 50 Hz model, is
also available for applicable
areas outside North
America.) The Carry-On
7000 only draws 6.9 amps
running. All internal components
are made of corrosion-resistant
materials, and the outside case is built of a tough,
durable polymer. The best news is, the Carry-On is priced
for budget-minded boatowners. It sells for a fraction of the
cost of a built-in water cooled system. |
| Zephyr Air-Conditioning |
 |
Zephyr ZF Units
Zephyr units are a series of cooling-only, self-contained air
conditioners designed for marine use. All models offer
direct-expansion operation in a compact, low profile unit with a
seawater-cooled condenser.
A self-contained unit is typically installed under a settee or
berth, or in a locker or other convenient location. A return air
grill should be located near the unit, and the discharge air is
ducted to a grill mounted high in the cabin.
All air conditioning components are installed on the Zephyr
chassis, including the compressor, condenser, evaporator,
blower and electrical components. The deep condensate pan
encloses the entire drip line of the unit and acts as the mounting
chassis. A mounting kit, with hold-down clamps and drain
fittings, is also included.
High efficiency rotary compressors offer quiet operation and
light weight, with low starting and running power requirements.
The unique seawater condenser is constructed of fluted
cupronickel tubing inside a copper shell, and is mounted in an
evaporator shroud to minimize unit size. The evaporator coil has
rifled tubing and lanced fins to increase heat transfer between
the cabin and the refrigerant. The squirrel-cage blower can be
rotated 90° to the vertical position.
Two electromechanical switch assemblies are available for
the Zephyr units. The ZFSA1-XB 2-knob switch has three
modes (OFF-FAN-RUN) and thermostatic control, and the
ZFSA1-Z(C)B is a 3-knob switch that also includes variable fan
speed control. Both come with a 10ft (3m) harness.
Zephyr units are designed for easy installation and serviceability.
All units come from the factory pre-charged with R-22,
eliminating the need for field charging, and are fully tested.
Units with R-417A (non-HCFC) refrigerant are also available.
Models are available in 5,000, 10,000, 12,000 and 16,000
BTU/Hr capacities, in either 115V/60Hz or 220V/50Hz.
In addition to the basic Zephyr unit, the following components
are required to complete the installation and are sold
separately or as a complete kit: seawater cooling system, air
distribution system, and control. |
| StowAway Units |
SXR, SNRand SHR Models
 StowAway V Rotary
• 7,000 - 24,000 BTU/Hr
• 115V & 230V, 60 & 50 Hz models
• Reverse-cycle for heating & cooling
• Low-profile unit
• Rotatable blower for discharge in any direction
• Convenient pre-wired plug
• Quiet operation
• Lightweight
• Rotary compressor
• Low run current
• Low inrush current
• Available with R-417A refrigerant
SXR & SNR Models
• For use with SMX II/SMX Net control systems
• Pre-installed temperature sensor
• High & Low refrigerant pressure switches
SHR Models
• For use with SSA controls
• High refrigerant pressure switch
• Easily accessible terminal strip for wiring
hookup
SHF and SXF Self-Contained Models
 Features
• New 18,000 BTU/HR model now available in
115V, 208-230V/60Hz and 230-240V/50Hz.
• The 18K model is built with a high velocity
blower.
• Now includes a return air filter and remote
electric box
• 5,000 - 24,000 BTU/HR
• Low profile, compact unit
• Reverse cycle for heating and cooling
• High efficiency rotary (5-18K) or scroll (24K)
compressors
• 115V & 230V, 50/60 Hz, and 220-240V, 50 Hz
units available
SXF Models
• SMX II Power/Logic box included with unit
• Pre-installed temperature sensor
• Use with the SMXir or SMXIIAB keypad/display
(not included)
SHF Models
• Use with SSA type 3-knob switch assembly
(not included) |
| Commercial DX Framed Package Units |
 • Pre-charged, self-contained heat
pump system
• 36,000 & 48,000 Btu/hr
• 230V 50/60, Hz 1 phase, and 230V &
460V, 3 phase models
• Reverse-cycle heating and cooling
• Horizontal or vertical configuration
• Rubber isolation mounts on
evaporators and compressor
• SMX II microprocessor control system
• Air filters included
• Horizontal or vertical air discharge
• Full coverage condensate pan |
| Remote Condensing Unit |
 Type F 5,000-16,000 Btu/hr Condensing Units
• Reverse-cycle seawater cooled condensing units
• 115 and 230V, 50/60 Hz; 220/240V 50 Hz models
• Ignition protected
• Dependable reciprocating compressor
• Properly-sized accumulator and receiver
• Rubber isolation mounts
WFAH Series
• For use with standard rotary switch assembly
• Wiring hookup on color-coded terminal strip
• High pressure switch
FX Series
• For use with SMX II control system
• SMX II power/logic module included on unit
• High and Low pressure switches
• Two-year warranty on new systems
FN Series
• For use with SMX Net control system
• SMX Net power/logic module, with Net software,
included on unit
• High and Low pressure switches
• Two-year warranty on new systems
 Type F 20,000 - 72,000 BTU/Hr Condensing Units
• Reverse-cycle, seawater-cooled condensing units
• Models available in many configurations
• Rubber isolation mounts
• Condensate drain pan
• High and low pressure switches
• Reciprocating or scroll compressors
• Can serve up to two Cruisair cooling units
• Three different control options:
- F series for use with 3-knob rotary switch
assembly
- FX series includes an SMX II power/logic board
- FN series includes an SMX Net power/logic
module.
• Available with R-417A refrigerant
 Type R 20,000 - 48,000 BTU/Hr Condensing Units
• Higher efficiency compressors at lower amperages
• Redesigned R type unit is lighter in weight
• Service ports on refrigerant lines and base valves
• Rubber isolation mounts on compressors
• Condensate pan with front and rear drains
• Corner mounting brackets designed for easy install
• High and low pressure switches
• Three different control options:
- R series uses a 3-knob rotary switch assembly
- RX series includes an SMX II power/logic board and
uses the new SMXht, SMXir or SMX II keypad / displays
- RN series includes an SMX Net power/logic module
• Electrical box can be remotely mounted to deck or
bulkhead up to 5'(1.5m) from unit
• Available with "green-gas" R-417A refrigerant
• Seawater coil manifolds are optional
• Heavy-duty vibration isolators are available
 Type J 5,000 - 16,000 BTU/Hr Condesing Units
• 5,000 - 16,000 Btu/hr.
• Reverse-cycle seawater-cooled condensing
units
• Small footprint (13" x 13")
• Removable electrical box
• 115 and 230V, 60 Hz; 220/240V 50 Hz models
• Ignition protected
• Dependable reciprocating compressor
• Properly-sized accumulator and receiver
• Rubber isolation mounts
• Wiring hookup on color-coded terminal strip
• High Pressure Switch
• JX Series for use with SMX II Systems
|
| Cooling/Heating Units |
 EBO Models
• Compact ductable cooling unit
• Rotatable, variable speed blower
• Insulated condensate pan with anti-slosh,
antifungal foam lining
• Air filter included
• Works with Cruisair F-type condensing
units
 EBOH Models
• 20,000-48,000 Btu/hr
• 115V and 230V, 60/50 Hz models
• Works with Cruisair Type F remote
condensing units
• Large-capacity belt-driven two-speed
blower
• Integral built-in condensate drain pan
• Anti-slosh, antifungal foam in drain pan
• Removable air filter for easy cleaning
 EBU Models
• Compact ductable cooling unit
• Rotatable, variable speed blower
• High-efficiency, internal PSC motor
• EHBU models with integrated electric heat
• Insulated condensate pan, which includes an
anti-slosh, antifungal foam lining
• Air filter included
• Works with Cruisair F-type condensing units
 EBS Models
• 12,000-16,000 Btu/hr
• 115V and 230V, 60/50 Hz models
• Works with Cruisair Type F or J remote
condensing units
• Entire unit enclosed in aluminum housing
• Variable-speed blower for fixed vertical
discharge
• Integral built-in condensate drain pan
• Anti-slosh, antifungal foam in drain pan
• Removable lint screen for easy cleaning
 Low Profile Models
• Low-profile, twin-blower, ductable cooling/heating
unit
• Works with Cruisair type F remote condensing
units
• 12,000 - 36,000 Btu/hr
• 115V and 230V, 50/60 Hz models
• Rotatable, variable speed blowers
• Condensate drain pan with anti-slosh, antifungal
foam
• Foam insulated metal surfaces
• Return air plenum on EBLP models
• High efficiency PSC blowers on EBUL models
• EHBL models have integrated auxiliary heat
 EMB and EHMB Models
• Cooling unit for use with Modulating
Systems
• Integrated refrigerant solenoid valves
• Rotatable blower with high-efficiency internal
PSC motor
• Deep condensate pan is insulated and
includes anti-slosh, antifungal foam lining
• Includes air filter and isolation mounting feet
• Available in cooling only or with electric heat
 RE/REU Remote Evaporators
• Compact ductable cooling or heating unit
• Rotatable, variable speed blower
• Insulated condensate pan with anti-slosh,
antifungal foam lining
• Air filter included
• “Positive Flow” water displacing condensate pan
• High efficiency evaporator coil
• Larger blower inlet for increased air flow across
coil
• Single piece shroud and coil enclosure
• Hose adapter included on 4-24K units
• Blower bracket with vibration isolation grommets
installed
• Mounting kit included
• Increased metal thickness on structural parts for
strength
• For use with water-cooled and air-cooled
condensers. Air-cooled product line is limited to
models 4-16.
 ESS & EDS Overhead Models
• Ductable, overhead cooling/heating unit
• Detachable cooling/heating modules for easy
service
• Aluminum cabinet includes return-air plenum
and mounting frame
• Variable speed blower with fixed vertical discharge
• Integral condensate drain pan with anti-slosh,
antifungal foam
ESS Models
• Single blower
• 12,000 and 16,000 Btu/hr
• 115 and 230 VAC, 50/60 Hz
EDS Models
• Dual blowers
• 24,000 and 30,000 Btu/hr
• 230 VAC, 50/60 Hz
 Twin Blower Models
• 12,000 and 16,000 Btu/hr.
• 115V and 230V, 60/50 Hz models
• Works with Cruisair Type F or J remote
condensing units
• Separate blower and coil assemblies
• Low-profile overhead mounting
 EFB and EFL Models
• Blow-through, non-ducted cooling/heating units
• Mounted high in closet or ceiling
• 115V or 230V, 50/60 motors
• Integral condensate pan with anti-slosh, antifungal foam
• Works with Cruisair ACA/ACH remote condensing units
• UL listed models available
EFB
• Single fan behind evaporator coil
• 4,000 - 16,000 Btu/hr models
EFL
• Twin fans behind evaporator coil
• 1,000, 14,000 and 16,000 Btu/hr models
 EBH Models
• 14,000 and 16,000 Btu
• 115 and 230 VAC, 50/60 Hz models
• UL listed models available
• Works with Cruisair ACA/ACH condensing units
• Blower mounted behind evaporator coils
• Intergral condensate drain pan with anti-slosh,
antifungal foam.
 EBD Models
• 30,000 - 72,000 Btu/hr
• 230 Volt, 60 Hz models (50 Hz also available)
• Works with Cruisair Type F remote condensing
units
• Variable speed blower
• Horizontal or vertical air discharge
(field rotatable)
• Integral condensate pan, with anti-slosh,
antifungal foam
• Foam insulated metal surfaces
• Replaceable air filter |
| Rotary Switch Assemblies |
 • Electromechanical Rotary Switches
• Black plates with modern graphics
• Multiple configurations for different uses
• Vertical and Horizontal versions |
| Cabin Controls |
 DX SMX Series Control System
• Works with SMXII or SMX Net Control Systems
• Optional Remote Control
• Automatic/Manual Fan Speed Control
• Optional 2-Speed Fan (SMX Net only)
• Inside Temperature Display
• Outside Temperature Display (SMX Net only)
• Dehumidification (absent) Program
• Nonvolatile Memory
• Low Voltage Shutdown
• High Pressure Shutdown
• Low Pressure Shutdown
• Fault Display
• Software Update Capability (SMX Net only)
• Remote System Control (SMX Net only)
• Slaving Capability (SMX Net only)
• Optional Convenience Panel (SMX Net only)
• Auxiliary Heat Control (SMX Net only)
• Brightness Control
 SMXht Keypad/Display
• Sleek modern Euro design
• Supports certain Vimar or Gewiss
bezels
• Backlight and Sleep Modes
• Controls both DX and TW systems
• World First Technology
• Automatic Dehumidification
• Complete System Monitoring
• Supports Auxiliary Heat for TW systems
• Pressure Switch Testing
• Low Voltage Protection
 SMX II Controls
• Microprocessor based system
• More than 20 programmable functions
• Easy plug-in installation
• Automatic monitoring of pressure
and voltages
• Easy to use, with clearly labeled keys
• Nonmetallic switchplate with soft
membrane switches
• Automatic or manual fan speed control
• Switchplates are available in many colors
• Dehumidification program
|
| Accessories |
 DX Seawater Pumps
• High capacity, centrifugal pumps
• 250 -10,800 gph capacities
• 115V and 230V, 60 Hz; 240V, 50 Hz;
and 220/440V, 3 ph. models
• Seawater grade construction, with glass
filled polypropylene or bronze pump heads
• Submersible or air cooled motors
• High head pressure models available
• Self-priming pumps available
 Pump Relays
PR8X
• Ignition protected
• Up to 8 control triggers
• 115V or 230V
• 15 amp fuse on pump circuit
PR3X
• Ignition protected
• 2 or 3 internally mounted triggers
• 115V or 230V
• 15 amp fuse on pump circuit
PR4D
• Up to 4 control triggers, ordered separately
• for 230V 3-phase pumps
 Auxiliary Heat Options
Cruisair auxiliary heat modules provide electric resistance
heat when seawater temperatures are too cold for adequate
reverse-cycle heating. The modules are installed in the
discharge air ducting, after the cooling unit.
• Add-on electric duct heaters
• 1-4 kW, 115V and 230V models
• Low temperature, high surface-area
rectangular heaters
• 2-stage temperature limit protection
• High temperature insulation
 Aluminum, Wood Frame, Plastic &
Plastic Snap-In Grills
Cruisair discharge and return air grills are available in a wide
assortment of dimensions, styles and materials to blend with
any yacht's interior.
The vanes of discharge grills are secured in nylon bushings
for easy dependable positioning. RA-type return air grills have
one row of fixed vanes. Wood return air grills have a lint
screen, which can be removed for cleaning.
Round plastic discharge grills are also offered in several
colors with and without shut-off dampers.
 Variable Speed Drive
The VSD is an optional solid-state micro-processor-based
fan speed controller designed to reduce blower noise,
especially when operating at slow speeds.
• Reduces blower noise, especially at slow speeds
• Controls frequency and/or amplitude of current to fan motor
• Available in 3 amp and 6 amp models
• Microprocessor-based, solid-state
• Install between switch assembly and blower motor
Plenums/Mounting Frames
Blower Plenum
Blower plenums mount directly to blower outlets, which
are different for each size blower. A plenum is selected by
blower size and duct outlets. All blowers have rectangular
openings, such that a blower plenum may be rotated 180°
from listed orientation.
Box Plenum
Box plenums are similar to blower plenums, except the
inlet is another duct connection. A box plenum has one
inlet, with multiple outlets on any of the other box sides.
Grill Plenum
Grill plenums are available for most grill sizes. But any
plenum with height (H) and width (W) dimensions greater
than the grill cut out will work. Flanges are available on
either the long or short sides, or both. Dual duct plenums
(with two duct connections) are also available.
Mounting Frames
Mounting frames come in many configurations designed
to be installed directly on the various evaporator units. They
provide a shock mount to eliminate the transfer of any
noise or vibration to the surface on which they are
mounted. The frame includes a means of supporting the
weight of the blower motor which extends out the back of
the blower housing. This also addresses the need for some
clearance below the units to accommodate the condensate
drain fitting. The mounting frame kits include the necessary
frame, brackets, hardware, and instructions to simplify the
installation.
Also available is a universal mounting leg kit, which
consists of four brackets or legs and the necessary hardware
and instructions for installing on any type evaporator.
The brackets are designed to provide a height adjustment
on the units. Depending on the evaporator selected, the
type of installation and the particular application, only three
brackets may be required. |
| Modulating Condensing Units |
 RM Models
• Redesigned RM type unit is lighter in weight
• Up to five independent cooling units on one condenser
• Model RM is compatible with all cabin controls
• Service ports on refrigerant lines and base valves
• Rubber isolation mounts on compressors
• Condensate pan with front & rear drains
• Corner mounting brackets designed for easy install
• Electrical box includes power relay and time delay, and
may be remotely mounted up to 5'(1.5m) from unit
• High efficiency Scroll compressors
• High and low pressure switches
• Hot gas bypass and de-superheat valves
• Seawater coil manifolds are optional
• Heavy-duty vibration isolators are available
DX Modulating Systems
Modulating System Controls
Each cooling unit in a modulating system requires its own separate
control. There are two control options; the SMX II microprocessor
control system or a 3-knob electromechanical switch assembly.
SMX II Control System
The following components are required for each cooling unit:
PLHMX-HV power/logic module, SMXir keypad/display, CXP
connection cable, and a TSEP temperature sensor.
The power/logic module includes a 3 ft (.9m) wire harness to
connect to the cooling unit junction box. The CXP cable, available in
many different lengths, connects the SMXir keypad to the P/L
module. The TSEP temperature sensor, also available in different
lengths, plugs into the P/L module and the sensor bulb is installed in
the return air path of the cooling unit.
• Works with SMXir Keypad/Display
• Works with SMXir Remote
• Automatic/Manual Fan Speed Control
• Inside Temperature Display
• Auxiliary Heat Control
• Dehumidification (absent) Program
• Nonvolatile Memory
• Fault Display
• Brightness Control |
| Dehumidification System |
 • Defogs windows and dehumidifies
spaces in vessels that operate in cold,
damp waters
• Air conditioning evaporator removes
moisture from air
• Produces “dry heat" for cold, damp
climates where humidity is a problem
• Engine heated water or electric
auxiliary heat available
• Separate humidistat automatically
controls humidity
• Available with SMX series
computerized controls |
| Modulating Tempering Units - Tempered Water |
 • Compact, modular design for installation
flexibility
• Reverse cycle heating and cooling
• Scroll compressors standard
• 24,000 to 120,000 BTU/Hr (2 - 10 tons)
• Oversized heat exchangers for loop
temperatures of 40° F (4.4° C) in cooling and
120° F (49° C) in heating
• Removable seawater manifolds to allow
cleaning of condenser tubing
• Modulating flow control maintains designed
loop water flow rate
• Integrated loop water strainer and flow switch
• Hot gas bypass valve maintains heating
performance in cold seawater temperatures,
and helps prevent water freezing in the heat
exchanger |
| Variable Frequency Drive |
 • Eliminates compressor start inrush current
• 208/230V 3 phase output, with 1-phase or 3-phase
input
• Full 60Hz capacity even at 50Hz input (230V only)
• Low electronic noise, CE approved
• 400/480V 3-phase models available
A variable frequency drive eliminates the large starting
inrush current of the compressor by ramping up voltage and
frequency in a controlled time period. This allows running on
limited dockside power, and also protects the generator from
overload.
In addition to eliminating inrush, the VFD will also run a
compressor at 60Hz, even when input power is 50Hz, which
allows full BTU capacity performance (230V only). The drive
also protects the compressor by monitoring input voltage and
output current, and will shut down if a power supply problem is
sensed. |
| Tempered Water Logic Control |
 • Up to 6 tempering units can be integrated into one network
• Keypad/Display has a 4-button control and a 4-line
backlit LCD display
• Multiple keypad/displays can be used for remote access
• Multi-unit panels come with circuit breakers for compressor
and pump control
• Chiller staging based on circulated water temperature
• Compressor rotation to equalize run time of each unit
• Compressor and pump time delay to prevent
simultaneous starting
• Records and logs faults and run times
Advanced Options
• Connect to an on-board computer or modem
• Current transducers to monitor compressor and
pump amperage
• Seawater temperature sensors
• Refrigerant pressure transducers
• Loop water and seawater pressure transducers
• Control an optional source of heat (electric immersion heater
or fuel-fired boiler)
• Remote unit shutdown for loadshedding
• Fault signal output for remote alarm |
| AT Air Handlers |
 • Compact design; large coil shroud volume for optimum performance
• High-efficiency internal-motor blower, except model AT4F.
Blower can be rotated in field
• Integrated 3-way bypass valve with easy-change power head
• Modulating flow control to ensure proper water distribution to all units
• Sloped, “Positive-Flow” drain pan with anti-slosh, antifungal foam
• Two 1/2” FPT drain connections on back of pan within footprint of unit
• Integrated chassis with vibration isolation mounting feet
• Remote air bleeder on 6ft (1.8m) of flexible tubing with ball valve
• Washable air filter included. Micro-Particle Anti-Allergenic air filters
available.
• Large, remote electrical junction box with 6ft (1.9m) wire harness
• 24k unit with high-efficiency internal-motor blower
• Water pressure test ports for troubleshooting
• Allowance for connecting variable fan speed drives
• Rotatable blowers
• ISTA certified packaging
• Change-Over Stat (COS) is now sold with the new AT power/logic box
model PLTX-HVSTAT which also includes a TSEP10. |
| CBLB Air Handlers |
 • Low profile air handler
• Twin blowers with high-efficiency PSC motors
• Integrated 3-way bypass valve with
modulating flow control valve
• Deep condensate pan is insulated, and
includes anti-slosh, antifungal foam lining
• Flexible air bleed valves
• Mounting frame, hose adapters and air filter
included
• Integrated electric heat available |
| Tempered Water Pumps |
 Seawater Pumps
• High-capacity, centrifugal pumps
• Seawater grade construction
• Single-phase 115/230V or 3 phase 230/460V dual
voltage motors available
• 50 or 60 Hz
• Available for high head situations
• Self-priming models available
 Circulating Pumps
• High-capacity, centrifugal pumps
• Seawater grade construction
• Single-phase 115/230V or three-phase 230/460V
dual voltage
• 50 or 60 Hz
• Rated at 40 ft. of head |
| TW Auxiliary Heat Modules |
 • Electric resistance heat modules
• 1-4 KW models
• 115V & 230V power
• Fintube heating elements
• Two-stage thermal protection
• High temperature insulated interior
HMDL Models
• Installed in flexible or built-in ductwork
• Used with ducted air handlers
HMH Models
• Not ducted, used with marriage band for direct
discharge
• Used with CBH models only |
| Tempered Water
Bypass Valve Assemblies |
 • Controls water flow through air handlers
• FPT water connections
• Condensate drain pan lined with
anti-slosh, antifungal foam
• Field-reversible on mounting base for
opposite flow direction
• Change-over thermostat for automatic
operation in heating or cooling mode |
| Tempered Water Accessories |
 Spirotop and Spirovent
• Automatic air bleed
• Simplifies bleeding of circulated
water system
• Spirovent removes entrapped air
carried in water
• Bronze and stainless construction
Fill Components
• Backflow preventer protects the fresh
water system from contamination
• Pressure regulator/relief valve allows
automatic, safe filling of system
• Bronze and stainless construction
Seawater Strainer
• Sizes from 1/2" to 3" available
• Bronze and stainless construction
Expansion Tanks
• Flexible internal diaphragm maintains
safe circulated water loop pressures
• Capacities up to 60 tons |
For RFQ (Request For Quotation), kindly drop us an email, and we will respond to your email within 1 working day.
Enquiries: mgt@tripower.com.sg |
|
|
|
|
